EMBLEM'S

there is one corvette emblem on the front and one on the rear deck lid . if they where to be taken off are there going to be holes left ?

I think they are usually adhesive connected and removed ( carefully ) with a heat gun, AFAIK. Good luck....... cjsullivan

I think so. On this thread one of the forum members talks about doing it to his 'vette:

http://www.corvetteforums.com/m_21295/tm.htm

They are put on there like most emblems, and mouldings these days, Simply with 3M tape. If you decide to remove them I would be very careful with the heat gun. I would also get some good adhesive remover, (3M) makes some good stuff, and put a few applications of it where the emblem meets the hood or truck, and let it soak through. This is how i removed all the moulding on my truck.

this is a good video for removing badges im sure the emblems would be the same.
 
http://videos.streetfire.net/search/badge/0/9BCB446C-2550-4295-A366-EB89EE0B9E08.htm
 
I hope that helps

thats me....  there are holes up front... the back is solid...

heat gun, string, and wd 40 are what i used...

-me