white88
8/11/2006 6:57:22 PM
Is there any where i can find a diagham for the vac. lines that run under the TPI? while changing my thermostat, some hard lines came unplugged in the area right behind the thermostat and under the plenum.
I just want to make sure I plugged them to the correct spot. Because now it just doesn't seem to idle quite right. I also put in new plugs and wires.. LIKE MY WIFE ALWAYS TELLS ME--IF IT AINT BROKE, DON'T FIX IT. BUT I NEVER LEARN ! Any help would be great
THANKS
mech259
8/11/2006 11:03:13 PM
They go to the vacuum control solenoid for the EGR valve. 1 is source vacuum and the other goes to the EGR valve.
white88
8/12/2006 2:34:19 PM
Mech259,
You are the man.
white88
8/13/2006 9:58:48 AM
[image][/image]i recently recieved this thanks to yet another helpful corvette owner. maybe it will help others as well
Thumbnail Image
TopSpeed
8/14/2006 12:58:10 PM
So is it OK now, my friend?
white88
8/14/2006 2:23:14 PM
I DID HAVE ONE OFF. IT SEEMS TO RUN BETTER !! THANKS AGAIN
