Bill87
10/15/2007 9:18:22 AM
I droped the dash bottom and did not see the conector for the VATS
I purchased the bypass - were can I get a picture of what to look for
most of the wires are close to the floor board - old guy not much room
rshiver
10/15/2007 10:58:25 AM
See if this will help you any Bill.
cwb
10/15/2007 11:10:06 AM
woodstock
10/31/2007 4:30:53 AM
the pic he showed you is for the decoder mod. if you got the key code bypass,that plugs into the orange and black wire at the base of your steering cloumn. just follow those two wires down till you see the plug. it should plug right in.if your decoder is bad, good luck in finding one.mine is an 86. i had to order the chip for my ECM to bypass VATS alltogether.PCM for less was 200.00 but i am on the road now with no VATS headaches. they will also upgrade the performance for same price. i just had the standard upgrade and mine runs beautifully.
