Corvette C4 Forum 1984 through 1996

3:73 vs 4:10 rear end

Thread Tools
 
Search this Thread
 
  #1  
Old 09-13-2008, 02:39 PM
LT4Dave's Avatar
Member
Thread Starter
Join Date: Oct 2006
Location:
Posts: 58
Default 3:73 vs 4:10 rear end

Thinking of going lower gear ratioin rear end. Stock LT-4 gears now. Pros and cons 3:73 or 4:10? Dave

[IMG]local://upfiles/3556/73BFAF4ECFEC407384B0F09D3C72C489.jpg[/IMG]
 
  #2  
Old 09-13-2008, 03:28 PM
cwb's Avatar
cwb
cwb is offline
Senior Member
Join Date: May 2007
Location: eastern NC
Posts: 1,567
Default RE: 3:73 vs 4:10 rear end

4:10? Lower gas mileage. Speedo off. Odo off.

Inconveniences is all they'll amount to...
 
  #3  
Old 09-13-2008, 04:13 PM
LT4Dave's Avatar
Member
Thread Starter
Join Date: Oct 2006
Location:
Posts: 58
Default RE: 3:73 vs 4:10 rear end

I think computer can be programed for speedo adjustment. What do you think of driveability. I know 4:10s would make a great stoplight racer. Probably wear out a set of tires really quick. Just wondering how it would be for all around driving. Don't really care about gas mileage. 6th gear is really tall. Does anyone have any input on rpms at highway speeds for each gear ratio. Thanks for input. Dave

[IMG]local://upfiles/3556/AC628BD662FB4087BCCD38197CA4BC22.jpg[/IMG]
 
  #4  
Old 09-13-2008, 06:15 PM
JoeVetteman's Avatar
Senior Member
Join Date: Nov 2006
Location:
Posts: 265
Default RE: 3:73 vs 4:10 rear end

Hey,Dave....if anything,I would go with the 3.73 set if you want to drive your car everyday...yes,the 4.10 set will improve acceleration,but think about how high your rpm's will be just going for a long drive.The computer can be programmed for whatever ratio you choose,speedo,shifting,whatever you want,but mileage will suffer.....unless,of course,since we are talking about your Vette,you decide to do what's best for you....which I know you will.But honestly,for a daily-driven car,the 3.73 is the best bet.Still gives great performance along with a minimal decrease in mileage and not to mention durability...but since we all share our thoughts,this is mine.May God bless you and yours....but no matter what,enjoy your Vette!!!! I sure do!!! The best...Joe.
 
  #5  
Old 09-14-2008, 09:57 AM
larry00's Avatar
Member
Join Date: Mar 2007
Location:
Posts: 90
Default RE: 3:73 vs 4:10 rear end

Well since I have a Dana 44 w/373 gears in my Hot Rod I say if you want to have a driver then the 373 is enough.
I have a LT 4 engine w/ 390 RW HP , built TCI 4L60 E and 3200 stall.
Yes you can reprogram the speedo I didand w/4L60 E I can drive 70 and still get 12 to 13 MPG W/315x17x10.5 Drag Radials on it.
Thats better than some old stock trucks I used to have get.
The 410 would be fine if you don't plan on driving any great distances.
 
  #6  
Old 09-14-2008, 07:22 PM
LT4Dave's Avatar
Member
Thread Starter
Join Date: Oct 2006
Location:
Posts: 58
Default RE: 3:73 vs 4:10 rear end

Thanks you guys for all your thoughts. Looks like 3:73 is the best all around option. Thanks again Dave

[IMG]local://upfiles/3556/565325B5704F421486A2A1B65E972A51.jpg[/IMG]
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
supermano57
Corvette C3 Forum
1
11-21-2005 10:44 PM
way235
Corvette C4 Forum
0
11-10-2005 04:14 PM
Kyle93
Corvette C4 Forum
6
10-19-2005 11:26 PM
nmoser01
Corvette C5 Forum
1
09-06-2005 06:13 PM
jerrys
Corvette C6 Z06
7
09-03-2005 07:13 PM



Quick Reply: 3:73 vs 4:10 rear end



All times are GMT -5. The time now is 03:56 AM.