building a radical 454, (help Lee, Mech and Bill)
Login  | |
|
|
|
|
|
RE: building a radical 454 - 11/1/2006 11:01:26 PM
|
|
|
C3 Starship
Posts: 4695
Joined: 7/25/2006
Status: offline
|
454!!!  You're a man after my own heart. Personally, I wouldn't have a crate engine. What's in it, who built it, are all the nuts and bolts right tight. Did anybody spit in your French fries?
If you want it done right, do it your self, then you KNOW what's in it, and if it's right or not.
People say, "oh, you can't build an engine for the price of a crate". Maybe so, but do you want some $7.00 and hour bolt buster building your engine, Hmmmm? Sorry, not me!!!
If you reeeaaally want a crate engine, build your engine, put it in a crate, load it in the back of a pickup, drive around the block, call your bud over and ask him to help you unload you new "Crate" engine.
No one need know!!!
_____________________________
1980 L-82 Fastback (forward too)
Mono composite front and rear.
Full adjust ride height and
response.
400+ hp, 454, M-22, 3.07
http://i121.photobucket.com/albums/o225/C3Starship/Patch.jpg
2007 H. D. Sportster, XL 883 EFI
|
|
|
|
|
RE: building a radical 454 - 11/1/2006 11:15:52 PM
|
|
|
blueshark
Posts: 2148
Joined: 7/20/2006
From: Dickson, TN.
Status: offline
|
That's my feelings exactly. How many beers did he have at lunch. was it friday after a bad week or was it monday after a binge. I think with the right parts and procedures I can build a better engine. just waiting for ya'lls advice on what parts and procedures to do like how far can I punch it or what heads to use or single or duel 4 bls. let 'er ripe ya'll. I'll bet Lee has some good advice. caint wait to hear it. what are you doing to yours Dave?
_____________________________
God Speed Rich.
www.larosadesign.net
Design, Engineering,Tooling
www.stantonscustomrods.net
"Welcome to Tennessee,
The patron state of shootin' stuff".......Shooter
|
|
|
|
|
RE: building a radical 454 - 11/1/2006 11:38:11 PM
|
|
|
C3 Starship
Posts: 4695
Joined: 7/25/2006
Status: offline
|
Hey George,
30 over on the bore, 9.5:1 pistons, steel not cast crank, heavy valve springs, port and polish, headers to sidpipes, single AFB 4 barrel (they have Huge secondaries). Lee has got me thinkin' turbo. I don't have the specs handy on the cam, but it'll lope like a Quarter Horse. Should roll out at a little over 400 HP.
How about a nice tall dual quad, that you need a periscope to see over?
I'm not goiing too tall, I want it all to fit under a L-88 hood.
I don't recommend going over, 30 or 40 over on the bore, possible over heat prob.
Dave
_____________________________
1980 L-82 Fastback (forward too)
Mono composite front and rear.
Full adjust ride height and
response.
400+ hp, 454, M-22, 3.07
http://i121.photobucket.com/albums/o225/C3Starship/Patch.jpg
2007 H. D. Sportster, XL 883 EFI
|
|
|
|
|
RE: building a radical 454 - 11/2/2006 1:15:31 AM
|
|
|
blueshark
Posts: 2148
Joined: 7/20/2006
From: Dickson, TN.
Status: offline
|
Dave, that sound like what I was thinking. punch it 30 over with forged @10-11:1 flat tops. stroked with a big forged crank, stock heads with hardend seats big SS valves and tripple springs ported and polished, roller rockers with a radical cam and a set of 650 dual feed holly's setting on a low profile intake all under the hood. big tube headers out to the existing leg burners. unless I could do more. looking for ideas. I haven't built many BBC's
_____________________________
God Speed Rich.
www.larosadesign.net
Design, Engineering,Tooling
www.stantonscustomrods.net
"Welcome to Tennessee,
The patron state of shootin' stuff".......Shooter
|
|
|
|
|
RE: building a radical 454 - 11/2/2006 9:15:04 AM
|
|
|
C3 Starship
Posts: 4695
Joined: 7/25/2006
Status: offline
|
George,
I don't exactly know why, but I was told that 9.5:1 would allow for use of pump gas. I believe that the higher comp would cause pre ignition. Not sure!
I believe that 10 or 11:1 would use a domed piston.
Dave
_____________________________
1980 L-82 Fastback (forward too)
Mono composite front and rear.
Full adjust ride height and
response.
400+ hp, 454, M-22, 3.07
http://i121.photobucket.com/albums/o225/C3Starship/Patch.jpg
2007 H. D. Sportster, XL 883 EFI
|
|
|
|
|
RE: building a radical 454 - 11/2/2006 1:26:30 PM
|
|
|
TopSpeed
Posts: 2092
Joined: 7/21/2006
Status: offline
|
You guys are drivin' me NUTS here, with your big block monsters!!! I gotta find a way down there, to go for a ride with you psycho's!!
_____________________________
That's not a tool.. that's a brick!!
|
|
|
|
|
Printable Version
A little twisted, but ain't that what the BB's are all about? 
