Corvette Forums   2006 Corvette C6 Z06 2006 Corvette C6 Z06  
Corvette Forums
Corvette Forums   Corvette Classifieds   Gallery   Corvette News   Member List   Search   Sponsors
  Forum FAQ   Calendars   Contact Us   Corvette Recalls   TSBs   Corvette Timeslips   Register   Login


WS wiper question

  Printable Version
Corvette Forums >> Corvette Models >> Corvette C3 Forum >> WS wiper question Page: [1]
Login
Message << Older Topic   Newer Topic >>
WS wiper question - 12/20/2007 7:37:49 AM   
alive69

 

Posts: 56
Joined: 10/8/2006
Status: offline
Relatively new motor, only used occasionaly to see if the wipers work.  Fuse is good.  When switched on, nothing happens.  I can hear a slight click inside the switch when turned on.  Access door does not open.  Override switch will not open the door either but the headlight doors will open with that override switch.  I can open the wiper door by going thru the vacuum actuator.  Asking for some ideas from some of you gurus out there.  Car sits a lot, especially in the winter, but I do start it up now and then.  I do not have a trouble shooting manual but will get one if you can't help me here.  Thanks, j     
Post #: 1
RE: WS wiper question - 12/20/2007 11:16:40 AM   
watwheel


Posts: 303
Joined: 9/9/2006
From: Michigan
Status: offline
watwheel's photo gallery
You might want to check the actuator for the dooror the tubing.  One or both may bad.  If your headlights are opening I would guess that would be the problem.

(in reply to alive69)
Post #: 2
RE: WS wiper question - 12/20/2007 11:59:42 AM   
Texas Jim

 

Posts: 441
Joined: 12/15/2005
Status: offline
Check out http://www.corvette-101.com .  I don't have the vacuum operated wiper panel as mine is an '81, but the site has all the trouble shooting info for the head lights, tank and all other vacuum system for the C3.  I'd say that you could figure it out with the info there.  Good luck.

(in reply to alive69)
Post #: 3
RE: WS wiper question - 12/22/2007 9:35:17 AM   
alive69

 

Posts: 56
Joined: 10/8/2006
Status: offline
Thanks tj,  Some one went to a lot of effort there. He had some great info on the headlights.  I may be missing something there but I found nothing on the ws wipers.  j

(in reply to Texas Jim)
Post #: 4
RE: WS wiper question - 12/22/2007 9:32:26 PM   
chvet73


Posts: 4
Joined: 12/20/2007
Status: offline
Check the ground that goes to the bolt on the bellhousing.  Should be a large ring terminal and a black wire going to it.  Took me a long time to find that on mine.  Replaced the switch and found out that was not the problem.  Some times that wire gets connected to the starter, not a good move.  It often breaks at the ring terminal.  Easy fix if that's the issue.

_____________________________

TBI Injection
Edelbrock cam and manifold
4spd, PW, PS, PDL
MSD Ignition, Coil
Headers
2.5 exhaust
Custom air conditioning
CD Player and amp
Ansen wheels
Taylor wires
Computer controlled HEI distributor
Powermaster starter and chrome

(in reply to alive69)
Post #: 5
RE: WS wiper question - 12/23/2007 11:00:06 PM   
Texas Jim

 

Posts: 441
Joined: 12/15/2005
Status: offline
Sorry Alive69, I thought you were having trouble with wiper cover not opening.  That is vacuum actuated, no?  Thought you were looking for "vacuum and elec." info alike.  As for the wiper motor not operating, you'd have to go from the switch to the motor with a multi-meter following the elec. diagram in the manual.  I figured that after checking out the vacuum info at that site, you'd beable to isolate the vacuum lines/circuit for the wiper cover.  Sure sorry it was all no help.

(in reply to alive69)
Post #: 6
RE: WS wiper question - 2/17/2008 12:26:17 PM   
filstoy

 

Posts: 9
Joined: 2/10/2008
Status: offline
And
quote:

ORIGINAL: chvet73

Check the ground that goes to the bolt on the bellhousing.  Should be a large ring terminal and a black wire going to it.  Took me a long time to find that on mine.  Replaced the switch and found out that was not the problem.  Some times that wire gets connected to the starter, not a good move.  It often breaks at the ring terminal.  Easy fix if that's the issue.


This is exactly one of the problems mine had. Got it working thanks to PG.


_____________________________

!971 Coupe
350/270 HP 4speed

(in reply to chvet73)
Post #: 7
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
Corvette >> Corvette Models >> Corvette C3 Forum
Jump to:


Featured Sponsors
Advertising Info

Top 10 Posters
c3 starship4749
blueshark2168
topspeed2092
lee willis1947
mech2591758
pay2play1533
cwb1506
corvette kin1162
73shark1089
pg1038

New Vendors
Corvette Guys
AMSOIL - Performance Oil Technology
Royal Purple

Corvette Forums .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.