mech259
Posts: 1758
Joined: 1/22/2006
From: Lumberton, Texas
Status: offline
|
First of all, there is adjustments on the inner portion of the upper control arms, I believe there are eccentrics that can move the camber in and out on the rear tires. If you want to raise the rear end, there are shim kits that go underneath the ends of the springs on each side to raise the ride heigth. Need to have a 4 wheel alignment after you change anything. Changing the rear spring is a troublesome task if you don't have the equipment to do it. Good Luck. 
_____________________________
L.B.
ASE Master Certified
L1 Emissions Certified
1986 C4
1969 RS Z28 Camaro
1970 Chevelle SS 396 (under construction)
|
Printable Version
'77 Rear suspension question - 
