Shop mauals for '77 Corvette (Full Version)

Corvette Forum >> Corvette Models >> Corvette C3 Forum

Shop mauals for '77 Corvette


  

kruser -> Shop mauals for '77 Corvette (5/5/2008 6:19:57 AM)

    I am about to start a 1977 L-82 restoration, can anyone point me to where I can buy a copy of the shop/repair manual/manuals? 

Thanks
kruser


  

pg -> RE: Shop mauals for '77 Corvette (5/5/2008 1:51:37 PM)

Hi again, you can get the service and shop manuals and the Assembly instruction manual (aim) from any of the Corvette Catalog houses, and you can get a Haynes repair manual at any auto parts store, PG.


C3 Starship -> RE: Shop mauals for '77 Corvette (5/5/2008 6:40:19 PM)

Go to www.ecklers.com , they have all the manuals, and you can get them year specific.

Haynes,...[8|]........don't they,.............make underware?  [sm=icon_rofl.gif]


( sorry, couldn't help myself..[&o] )


1974corvetteowner -> RE: Shop mauals for '77 Corvette (5/5/2008 8:13:23 PM)

If your going to be doing a restoration the Assembly instruction manual is a very useful book to have


Texas Jim -> RE: Shop mauals for '77 Corvette (5/6/2008 3:47:56 AM)

   Yes, like these guys said, get one of the basic tune-up manuals, "Chilton" if possible.  The best manual that I've come across, not because I have one, is the "GM Corvette Shop Manual" for your specific year (only) from the parts department at the Chevy dealer.  It has mostly "Third Shop" info and above, not much operator or basic tune-up level info, but has ALL the specifics for your year 'Vette not found in any other manuals.  It goes as far as breaking down the transmission, A/C compressor, carb, etc.
  The best of luck to you.  I know it'll be a great project, I'm alittle jealous, well, alot jealous.  Again, good luck.


mikee -> RE: Shop mauals for '77 Corvette (5/6/2008 5:27:51 AM)

Early 77 had alarm key in fender,late had alarm in key at door handle.T top gasket had different number of small plastic pins within the gasket. More or less pins from early and late.17 pins vs. 19.You'll need to check on that. My 77 is down to just the body,totally dismantled.It's been 1 1/2 yrs to date.Was L 48.


Phill -> RE: Shop mauals for '77 Corvette (5/6/2008 9:06:21 AM)

a wiring diagram is also a good idea as the repair manual doesnt show you all the wiring in the car. a GM factory repair manual and an assembly manual(AIM) for your specific year vette is also a must if your going to work on your vette.


  

Page: [1]

Return to Corvette Forums home page or view the Full Version of this page.