Corvett convertable top one pin sticking

Corvette Forums Corvette Classifieds Gallery Corvette News Member List Search Sponsors
Forum FAQ Calendars Contact Us Corvette Recalls TSBs Corvette Timeslips Register Login

Corvett convertable top one pin sticking

Printable Version

Corvette Forums >> Corvette Models >> Corvette C4 Forum >> Corvett convertable top one pin sticking

Page: [1]

Message

<< Older Topic Newer Topic >>

Corvett convertable top one pin sticking - 6/2/2008 3:08:38 PM

gmk

Posts: 3
Joined: 5/4/2008
Status: offline

Need some advice, attempted to lower the top, the right pin , cable release releases the left one , sticks doers not release,. Can I , or how can I adjust the righht side other than taking it into the shop, Help!

Post #: 1

RE: Corvett convertable top one pin sticking - 6/16/2008 11:03:46 AM

Rustybluebeast

Posts: 8
Joined: 6/12/2008
Status: offline

I am also curious about this. I looked at the rigging of the cable and it looked like there was no real adjustment to remedy cable stretching. Perhaps somebody sells a new cable kit for it? Sometimes I actually have to reach back and pull the cable right at the pin release mechanism. Its pretty anoying.

_____________________________