Videos of the Vette with and without my Super40s (Full Version)

Corvette >> Corvette Models >> Corvette C3 Forum

Videos of the Vette with and without my Super40s

  

DryCreamer -> Videos of the Vette with and without my Super40s (7/9/2008 2:55:19 PM)

Here''s a video of my Vette right after we cut the mufflers off:

http://www.youtube.com/watch?v=MjRDwNhEA_s

Here is with the new Flowmaster Super 40s:

http://www.youtube.com/watch?v=fx88xTDW-NM


Specs

Summit Iron heads, 8.4:1 compression, 230 duration @ .050 int/ext | 110 deg lob. sep.| .488 lift int/exh
single exhaust thats kinda why its raspy when you rev it with my mufflers

this is before I spun the rod bearing, I just got my block back from the machine shop, so I should be able to start putting my engine together, everything is the same cept I got flattop pistonss so it should be 9.4:1 compression!!  hopefully I will get duals next, it is in the budget!!

  
73shark -> RE: Videos of the Vette with and without my Super40s (7/9/2008 7:01:49 PM)

What''s your head combustion chamber volume?  The reason I ask is the L-82 w/ flat tops and double valve reliefs has a CR of 9:1 with a 72 cc head.

DryCreamer -> RE: Videos of the Vette with and without my Super40s (7/10/2008 9:50:24 PM)

I have 67cc heads

stock CR was 8:1, with the stock 76cc heads

the stock pistons have a massive 18cc dish, but remember, I spun a rod bearing, so my new engine, which I start assembling this weekend, will have the flat-tops and a .022" head gasket which should put me just over 9:1


I was VERY disappointed when I took the heads off and saw those pistons

  

Page: [1]

Return to Corvette Forums home page or view the Full Version of this page.