gmichaelc
Posts: 13
Joined: 12/21/2006
Status: offline
|
Hi Gang
I just replaced my GM shocks that have the ride control valves with some standard shocks
I get a better ride but the DIC keeps flashing ''''Shocks Inoperative'''' Max Speed 80 MPH''''
Is there a way to fool the computor by pulling a relay, or should I just cut the electical connetor from the shocks, solder the wires together and plug them back in so the computor
sees a complete circuit?
I am sure that someone has had the issue before and fould a soulation
Thanks in advance
Found solution but can''t seem to delete this post
< Message edited by gmichaelc -- 8/13/2008 9:39:22 PM >
|
Printable Version
shock replacement - 
