Valve Cover Gaskets; R & R (Full Version)

Corvette Forums >> General >> General Tech

Valve Cover Gaskets; R & R

alive69 -> Valve Cover Gaskets; R & R (7/20/2008 3:16:33 PM)
1990/L98/350: I posted this in the C-4 section but no response. Can one of you teckies tell me the "Chilton Labor Time" or an "estimated" time to remove and replace the valve cover gaskets on my stock, 90/L98? I''m an average "shade tree" mech. with all the tools. Thanks, j

C3 Starship -> RE: Valve Cover Gaskets; R & R (7/20/2008 5:43:04 PM)
I wouldn''t think it would take over an hour to do both sides. Hood open, to hood closed. ( depends on clean up and prep required ) You may have to move some stuff, but it''s not really complicated. Just don''t get in a hurry.

alive69 -> RE: Valve Cover Gaskets; R & R (7/21/2008 10:12:28 AM)
Thanks Starship. I have a c-3 and know its a pretty simple task there. Opening the hood on the c-4 is intimidating to me. There''s stuff everwhere, especially on the left side. You have given me more confidence, but we will see. Thanks again

C3 Starship -> RE: Valve Cover Gaskets; R & R (7/25/2008 5:50:18 AM)
You''re welcome. [:)] One step at a time, then move on. I''m sure that you''ll do just fine. [;)]

Page: [1]

Return to Corvette Forums home page or view the Full Version of this page.