Corvette Forums   2006 Corvette C6 Z06 2006 Corvette C6 Z06  
Corvette Forums
Corvette Forums   Corvette Classifieds   Gallery   Corvette News   Member List   Search   Sponsors
  Forum FAQ   Calendars   Contact Us   Corvette Recalls   TSBs   Corvette Timeslips   Register   Login


RE: ATI Procharger Kit

  Printable Version
Corvette >> Corvette Models >> Corvette C6 Forum >> RE: ATI Procharger Kit Page: <<   < prev  1 [2]
Login
Message << Older Topic   Newer Topic >>
RE: ATI Procharger Kit - 9/27/2006 9:20:57 AM   
Lee Willis

 


Posts: 1991
Joined: 7/27/2005
Status: offline
Lee Willis's photo gallery
That is a good bit of power. Some comments:

Traction. You can go to slightly wider rubber (305s will fit on a C5, I think, not sure). Going to drag radials will also help but you give away all wet weather performance (can't even drive at 25 mph on a moist road).
But to do this right you need:
- to tub the rear wheel wells so much wider tires will fit. Lingenfelter sells a kit - everything you need including hardware to relocate some minor shock absorber stuff. You can install the kit yourself but it requires cutting and using body adhesive: Lingenfelter's Ed Taylor described it as "the type of thing that is really easy the second time you do it." I had a body shop do it, they chargedabout $700.
- put on wider wheels, 11 inch minimum, 12 inch or 13 inch wide. I went with 12.5 inch wide and 18 inch diameter instead of 19 in because BFG drag radials only come in 18 inch -- I run 345 wide. Wheels this wide were quite rare and $$$$ when I bought them, but I understand there are now some ZO6 look alikes in 12 inch width at reasonable prices, and others.
- then wider tires, 335 or 345 section width - Michelin makes one, I think Pirelli, and BFG makes a great 345 x 18 drag radial. Also note, you get only 4000-5000 miles on the street with a set of $340 each drag radials (but then, you get only about 15K miles with the Michelins - performance does have its price.

Do you have a stock bottom end? if so, take it very easy. I've seen several 525+HP blown cars split the block or pistons.

_____________________________

2007 Aston Martin Vantage Prodrive
Lincoln MKZ "Grandfather car"
''98 Z28 with iron LS 408, NOS, tricks, street driven mid 9s (sold to my youngest son for $1, Aug 28, ''07)
''02 SCd 427 cid ZO6, 704 RWHP, sold Aug. 28, ''07

(in reply to raytools)
Post #: 11
RE: ATI Procharger Kit - 9/27/2006 4:25:46 PM   
raytools

 

Posts: 22
Joined: 5/24/2006
Status: offline
Hi again
the bottom end is stock. I will probably have it changed out this winter.
mean while I'll be checking out some of your leads on tires and wheels, and also, the
lingenfelter kit.
one after market co. is offering the rear quarter kit from a Z06, that would probably
give me room for some larger tire and wheels.
thanks for advice
Ray

(in reply to Lee Willis)
Post #: 12
RE: ATI Procharger Kit - 9/28/2006 5:33:31 PM   
janstubbs

 

Posts: 9
Joined: 9/28/2006
Status: offline
What did it do to your gas mileage? Noisy?

And does it eat z06s now?

_____________________________

Justice for all who can afford it!. '07 Coupe 6MT soon.

(in reply to Lee Willis)
Post #: 13
RE: ATI Procharger Kit - 9/28/2006 7:19:17 PM   
Lee Willis

 


Posts: 1991
Joined: 7/27/2005
Status: offline
Lee Willis's photo gallery
In my experience the Procharger does not hurt your gas mileage that much. Very likely changing out the cam had more impact on that.

_____________________________

2007 Aston Martin Vantage Prodrive
Lincoln MKZ "Grandfather car"
''98 Z28 with iron LS 408, NOS, tricks, street driven mid 9s (sold to my youngest son for $1, Aug 28, ''07)
''02 SCd 427 cid ZO6, 704 RWHP, sold Aug. 28, ''07

(in reply to janstubbs)
Post #: 14
RE: ATI Procharger Kit - 9/29/2006 12:16:32 AM   
raytools

 

Posts: 22
Joined: 5/24/2006
Status: offline
the engine is still quiet, almost as smooth as a stock engine, and I still
got 28 MPG, on the highway.
I have not track tested it yet, but it really pulls hard. traction is the major
problem at present. it definitely has more HP than a Z06. 565 on rear wheels!
I'll keep you posted on future up-grades

Ray

(in reply to Lee Willis)
Post #: 15
RE: ATI Procharger Kit - 9/29/2006 12:30:28 AM   
PAY2PLAY


Posts: 1533
Joined: 10/2/2005
Status: offline
PAY2PLAY's photo gallery
Hey Ray, glad to hear that she is finally putting down some numbers you are happy with. Look forward to hearing what else you do to her in the future.

_____________________________

'98 6 Speed Coupe (SOLD Oct. 07)
'99 Lexus RX300 (wifes)
'02 Lexus GS300 Sport Design (daily driver)

[link=http://media.putfile.com/Exhaust-Clip81]Exhaust Sound Clip[/

(in reply to raytools)
Post #: 16
Login OR Register now to post a reply to this forum topic.
Page:   <<   < prev  1 [2]

 
Corvette Forum >> Corvette Models >> Corvette C6 Forum
Jump to:


Featured Sponsors
Advertising Info

Top 10 Posters
c3 starship4814
blueshark2180
topspeed2092
lee willis1991
mech2591760
pay2play1533
cwb1508
corvette kin1162
73shark1130
pg1066

New Vendors
AMSOIL - Performance Oil Technology

Corvette Forums .com is not affiliated with or endorsed by Chevrolet Motors Division or General Motors.