TIRE PRESSURE MONITOR

Printable Version

Corvette Forum >> Corvette Models >> Corvette C5 Forum >> TIRE PRESSURE MONITOR

Page: [1] 2   next >   >>

Login Message << Older Topic   Newer Topic >>

TIRE PRESSURE MONITOR - 5/27/2006 11:23:52 AM    2001c5   Posts: 21 Joined: 5/27/2006 Status: offline HI GUYS.. WHEN I BOUGHT MY 01 VETTE, THE MONITOR WOULD SHOW TIRE PRESSURE, NOW ALL IT SHOWS IS XXX, ANY IDEAS? Post #: 1

RE: TIRE PRESSURE MONITOR - 5/27/2006 11:25:02 PM    Dave01 Posts: 690 Joined: 9/24/2005 Status: offline Look in your owners manual. It should explain how to do a relearn for the tire sensors. Hopefully, the sensors' batteries are not dead, but if every tire pressure readout displays XXXX, then the relearn may do the trick. _____________________________ 2001 MN6 Coupe, all options Halltech Stinger-R intake w/cold air mod - see www.conceptualpolymer.com (Corvette Corner) BPP shifter w/glass elegance shift knob Borla Stinger quad round exhaust Goodyear GSD3s (in reply to 2001c5) Post #: 2

RE: TIRE PRESSURE MONITOR - 5/29/2006 1:42:09 PM    2001c5   Posts: 21 Joined: 5/27/2006 Status: offline OK DAVE, I LOOKED IN THE BOOK, NOTHING ABOUT RELEARN. (in reply to Dave01) Post #: 3

RE: TIRE PRESSURE MONITOR - 5/29/2006 5:20:16 PM    2001c5   Posts: 21 Joined: 5/27/2006 Status: offline dave, where are these batteries located? (in reply to 2001c5) Post #: 4

RE: TIRE PRESSURE MONITOR - 5/29/2006 11:26:31 PM    Dave01 Posts: 690 Joined: 9/24/2005 Status: offline 1) Turn ignition on 2) Press "Reset" button in order to clear any IPC display warning messages 3) Press and release the "Options" button on the DIC to scroll through the display options until the IPC display is blank 4) Press and hold the DIC "Reset" button for 3 seconds 5) Press the "Options" button again until TIRE TRAINING message appears 6) Press "Reset" button until the IPC "Learn L Front Tire" message appears in order to begin the programming 7) Install the J41760 Tire Pressure Monitor (TPM) System Programming Tool (large magnet will do) over the left front valve stem 8) The horn will sound, indicating the left front TPM sensor is programmed (if this takes more than 15 seconds, pull magnet back and try again, it will give you three tries. Then you must start over) 9) When the horn sounds, proceed to program the next TPM sensor in the following order as directed by the IPC messages: -Learn R Front Tire -Learn R Rear Tire -Learn L Rear Tire Programming can be canceled by turning ignition off, waiting 2 minutes with no sensors being learned, finishing all 4 wheels or through the DIC. If the programming is canceled with less than 4 sensors learned, it will only accept the codes programmed up to that point. _____________________________ 2001 MN6 Coupe, all options Halltech Stinger-R intake w/cold air mod - see www.conceptualpolymer.com (Corvette Corner) BPP shifter w/glass elegance shift knob Borla Stinger quad round exhaust Goodyear GSD3s (in reply to 2001c5) Post #: 5

RE: TIRE PRESSURE MONITOR - 5/30/2006 10:18:00 AM    2001c5   Posts: 21 Joined: 5/27/2006 Status: offline ok dave, i will try it today.............i will let you know. (in reply to Dave01) Post #: 6

RE: TIRE PRESSURE MONITOR - 5/30/2006 6:16:27 PM    2001c5   Posts: 21 Joined: 5/27/2006 Status: offline DAVE, I GOT THE SYS FIXED, THANKS TO YOU. F SCHULTE PS. I USED A MAGNETIC PARTS BOWL, IT WORKS WELL (in reply to 2001c5) Post #: 7

RE: TIRE PRESSURE MONITOR - 5/30/2006 10:43:40 PM    Dave01 Posts: 690 Joined: 9/24/2005 Status: offline That's great to hear! Congrats! Dave _____________________________ 2001 MN6 Coupe, all options Halltech Stinger-R intake w/cold air mod - see www.conceptualpolymer.com (Corvette Corner) BPP shifter w/glass elegance shift knob Borla Stinger quad round exhaust Goodyear GSD3s (in reply to 2001c5) Post #: 8

RE: TIRE PRESSURE MONITOR - 5/31/2006 10:44:17 AM    2001c5   Posts: 21 Joined: 5/27/2006 Status: offline JUST FOR GRINS WHERE THE BATTERIES LOCATED?................................. (in reply to Dave01) Post #: 9

RE: TIRE PRESSURE MONITOR - 5/31/2006 3:37:26 PM    Dave01 Posts: 690 Joined: 9/24/2005 Status: offline I believe the sensor batteries are inside the sensors themselves. Fortunately, they tend to last many years. dave (in reply to 2001c5) Post #: 10

Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds

Corvette Prices

Corvette
Corvette Z06
Corvette History

Top 10 Posters
c3 starship 4814 blueshark 2180 topspeed 2092 lee willis 1991 mech259 1760 pay2play 1533 cwb 1508 corvette kin 1162 73shark 1130 pg 1066

New Vendors
AMSOIL - Performance Oil Technology