Shift knob removal, automatic

Corvette Forums Corvette Classifieds Gallery Corvette News Member List Search Sponsors
Forum FAQ Calendars Contact Us Corvette Recalls TSBs Corvette Timeslips Register Login

Shift knob removal, automatic

Printable Version

Corvette Forums >> Corvette Models >> Corvette C4 Forum >> Shift knob removal, automatic

Page: [1]

Message

<< Older Topic Newer Topic >>

Shift knob removal, automatic - 6/3/2006 11:14:54 PM

eewiz

Posts: 7
Joined: 6/3/2006
Status: offline

How do you get the shift knob off? I popped out the button, and removed the retainer ring. The knob wont BUDGE! Is there a set screw? No mention in the GM service manual. Automatic. Thanks for advice.

96 LT1 yellow.

Post #: 1

RE: Shift knob removal, automatic - 6/5/2006 7:24:56 AM

mech259

Posts: 1760
Joined: 1/22/2006
From: Lumberton, Texas
Status: offline

That's how mine comes off. Probably lots of years and being stuck to the shifter. May have to get physical with it.

_____________________________

L.B.
ASE Master Certified
L1 Emissions Certified
1986 C4
1969 RS Z28 Camaro
1970 Chevelle SS 396 (under construction)

(in reply to eewiz)

Post #: 2

RE: Shift knob removal, automatic - 6/20/2006 8:33:36 AM

Larry Brumbaugh

Posts: 15
Joined: 6/20/2006
Status: offline

Saw your post this morning. Unfortunately saw my dog heading for the door as well he's gotta go and I've got to get to work. Info is in the manual. When I get home tonite I'll sap you back.

Larry

(in reply to eewiz)

Post #: 3

RE: Shift knob removal, automatic - 6/20/2006 8:15:01 PM

Larry Brumbaugh

Posts: 15
Joined: 6/20/2006
Status: offline

Not sure if the 96 is the same but my 93 GM Service manual describes the following:
Remove shifter button by prying up, shift button retainer, snap ring, and shift knob. no mention of set screw w/ the automatic just the manual tranny. I took mine off a while back to replace the light (position indicator) and just strongarmed it loose after a little wd 40 the snap ring attaches around the control lever. Hope this helps.
Larry

(in reply to eewiz)

Post #: 4

RE: Shift knob removal, automatic - 12/22/2006 2:32:20 PM

JoeVetteman

Posts: 260
Joined: 11/18/2006
Status: offline

Hi!! You'll need a set of snap ring pliers and then just enjoy yourself pulling it out! I did it to my '96 to put one of those neat-looking "carbon fiber look" shift knobs.But before I put the new one on,I put a key ring with a little logo that I got at the Air and Space Museum.It reads, "REMOVE BEFORE FLIGHT"!!!!!

(in reply to eewiz)

Post #: 5