C3 Cross Flags Logo
 

Trying to find a reproduceable art ready picture of the C3 cross flags. I can find a lot of jpg pictures but the resolution is too low to reproduce. I am having some wheel caps made and need to find this logo to complete them. Unfortunately they are an odd size, 1 3/8", that is why i can't just buy the caps. Any help or direction would be greatly appreciated.

RE: C3 Cross Flags Logo
 

Hi, you might try www.riksvet.com part #WHL135, WHL136 or WHL137, I have Western Wheels on my car and I lost one of the original center caps so I stuck differant caps on one side untill I found a replacement. The emblems they offer are 1-3/4" so for $ 9.95 a set you might be able to use them for your artwork. Pete.

RE: C3 Cross Flags Logo
 

Thanks for the lead. I checked them out but they are not the C3 cross flags. I guess I will keep on surfing until i find it. I know it's out there to be had. Thanks again!!

RE: C3 Cross Flags Logo
 

Here's some.

[IMG]local://upfiles/2713/129704655E114574A8E732DDC337DDB1.jpg[/IMG]

[IMG]local://upfiles/2713/474D1605E61F4CC5AA788BF93A04E80A.jpg[/IMG]

[IMG]local://upfiles/2713/3F5898E47C88423FAF33E9582941930D.jpg[/IMG]

[IMG]local://upfiles/2713/FF87530DCD154785BF67AA10B9431E3D.jpg[/IMG]

[IMG]local://upfiles/2713/E63B16E8B0E1487BB7DF4D0BDB9F743A.jpg[/IMG]

RE: C3 Cross Flags Logo
 

thanks bs but once again the resolution is not good enough for reproduction. I can't believe chevy doesn't have something that can work. Just have to keep looking. If you do happen upon a good one let me know. Thanks again
Mike

RE: C3 Cross Flags Logo
 

You could buy something with the logo, like the cap stickers that several Vette parts places sell, and throw them on a scanner... Even cheap (under $100) scanners do over 1000 DPI. If you'd like to PM me or drop me an email, I'd be happy to scan whatever you snail-mail to me and send you the digital version...

bill.

RE: C3 Cross Flags Logo
 

Thanks Bill I did just what you suggested. Bought a wheel cap from ecklers and i am going to take it to my the printer I use for my business to reproduce it. Should work. Still can't believe there is no avenue to obtain a logo. Oh well thanks to everyone for the advice.
Mike