F/S ETP 225 heads
 

Just kinda testing water with these. They are brand new 11* ETP 225 heads with patriot extreme spring kit upgrade, 2.08/1.57 valve, milled down to 57cc, comes with the rocker stands. These heads cost $2530 + shipping with the springs, milling, and rocker stands, and would also take a long time to be built and shipped out to you. These are ready to be shipped out starting on the 23rd. These are IMO the best heads on the market at this time.

The reason I am selling them is because I am purchasing a set of ETP 215's w/ rocker stands, pushrods, and some other misc. crap from Slickvert off of LS1tech.

The ETP 225's, are currently being shipped to my house, They havent been delivered as of yet (due to be delivered this uesday). Here is advertised flow chart from ETP's site:
-----------------------------------------------------------------------
http://www.etheads.com/flowsheets/ET...1_GIII_225.htm

Cylinder Head: G III LS1 11° Application: Street / Race
Port Volume: 225cc Chamber Volume: 35cc to 72cc
Test Bore: 4.000" Test Pressure: 28.00" Water
Intake Valve: 2.080" Exhaust Valve: 1.570"

Valve Lift Intake Exhaust Valve Lift
.100" 71 57 .100"
.200" 153 114 .200"
.300" 208 164 .300"
.400" 265 204 .400"
.500" 308 224 .500"
.550" 320 228 .550"
.600" 328 231 .600"
.650" 332 234 .650"
.700" 320 236 .700"

-----------------------------------------------------------------------

I am looking to get $2450 shipped.