View Full Version : cursuing at it ain't helping


d93vette
09-26-2007, 08:38 AM
i just finshed painting some spots on the front bumper and the tape i used won't come off clean. anyone know some tricks too get this off? i'm ready to pull out the sander on this. i've used road&tar,rubbing compound andstill the same.

wrwalke
09-26-2007, 09:20 AM
Any of the orange oil based cleaners should do the trick. Try to stay away from the rougher solvents like tolulene and company unless they are VERY diluted.

bill.

Phill
09-26-2007, 10:07 AM
Using a blow dryer may help the tape come off easier.

3BlkC4Ragtop
09-26-2007, 11:57 AM
GOO-GONE
or Goo something or other.. i have a bottle at home

usually avail at hardware stores/cleaning aisle in grocer

C3 Starship
09-26-2007, 09:47 PM
Ya might try "Hot" water and a sponge. The heat will soften the tape glue, and the water will help with penitration and removal of the tape. Scrub with the sponge to remove the "paper" tape. This all depends, of course, on the tape you used. If it's plain ol' masking tape, this will do the trick. Any remaining tape goop can be removed with WD-40.

d93vette
09-28-2007, 12:36 AM
thanks guys, i'm pullin my hair out on this one. i'm gonna try everyone of the posts.

cwb
09-28-2007, 10:39 PM
ORIGINAL: C3 Starship

Any remaining tape goop can be removed with WD-40.


WD40 will solve almost any adhesive. It turns it into gummy jam, but will get it off.