ASTRO VENT KNOB REMOVAL
#4
RE: ASTRO VENT **** REMOVAL
You are right there is one very small set screw in the bottom of each ****.
Turns out they are stripped.
I guess I will need to put the ***** off with some pliers.
Hope I don't screw something else up.
Turns out they are stripped.
I guess I will need to put the ***** off with some pliers.
Hope I don't screw something else up.
#8
RE: ASTRO VENT **** REMOVAL
Not sure but I would imagine. perhaps for the computer industry or something. If not how about drilling it out and re-tapping it a little bigger. Better than yanking it off with pliers, right? Good luck with it. Cheers
#9
RE: ASTRO VENT **** REMOVAL
How about putting a small dab of elmers glue on the allen wrench, inserting it in the screw, and letting it set up. Now ya might be able to pull gently as you turn the screw, and get the screw to kinda thread it's way out. Soak the wrench and screw in hot water and the glue will disolve, thus releasing the screw from the wrench. Just a thought.