Corvette Forums - Corvette Enthusiast Site

Corvette Forums - Corvette Enthusiast Site (https://www.corvetteforums.com/forum/)
-   Corvette C3 Forum (https://www.corvetteforums.com/forum/corvette-c3-forum-15/)
-   -   cleaning up the engine compartment (https://www.corvetteforums.com/forum/corvette-c3-forum-15/cleaning-up-engine-compartment-8806/)

jsholm2 02-23-2008 02:14 PM

RE: cleaning up the engine compartment
 
Those are some really nice pics. Did you do all of that yourself? How hard is it to pull the engine?

DeeVeeEight 02-23-2008 06:55 PM

RE: cleaning up the engine compartment
 
Here, [sm=icon_stickpoke.gif] Pull my finger!

73shark 02-23-2008 10:51 PM

RE: cleaning up the engine compartment
 
Not hard. Get an engine hoist and a leveler and you too can pull your engine.

blknblu68 02-24-2008 10:55 AM

RE: cleaning up the engine compartment
 
Thanx! it wasnt real bad but i have pulled motors many times before from camaros chevelles novas etc.. but this was my first vette, It had a descent 454 with worn out old L88 heads on it and the valves were goin so i pulled it, I found out the car was an original 350 hp 327 and happen to have a 350 hp 327 that was new so i dropped it back in after the cleaning (which was the hard part).
it is a good time to replace all worn stuff like motor mounts,clutch and pressure plate,battery cables,dry rotted vaccum lines,etc....

butchkim 02-28-2008 06:02 PM

RE: cleaning up the engine compartment
 
hi guys, what is por-15 and where can you get it and how much does it cost? my engine compartment is in decent shape but it could use a new coat, thanks!![sm=patriot.gif]

73shark 02-28-2008 08:07 PM

RE: cleaning up the engine compartment
 
Check it out here: http://www.por15.com/products.asp?dept=1

POR = Paint Over Rust

Edit: forgot to mention to be sure and wear gloves cuz the stuff doesn't come off skin. [:o]

butchkim 02-29-2008 02:24 PM

RE: cleaning up the engine compartment
 
thank you!!- i,m getting some!

blknblu68 02-29-2008 03:00 PM

RE: cleaning up the engine compartment
 
just a heads up i dont think por15 is to be used on plastic or firewall (fiberglass) but i may be wrong but is great for things like anti rust for frame,a-arms etc..


All times are GMT -5. The time now is 04:50 PM.


© 2024 MH Sub I, LLC dba Internet Brands