Corvette C4 Forum 1984 through 1996

Opti Spark

Old Dec 23, 2017 | 08:40 PM
  #1  
Tom G's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2009
Posts: 19
From: Prospect, Ohio
Unhappy Opti Spark

I have a 92 that I had taken to a dealer because you could not keep it running. After them spending a great deal of time to determine the problem they said I needed to replace the optispark and of course the water pump. I had it towed home for I did not want to spend the $2000 they said it would cost. Asked my local mechanic if he would do it and he said no for he had done one once before and said he would never do another. When I asked him why, he said that he spent so much time trying to get it set right he would not do it again. My question is doesn't the optispark just fit on one way and therefore doesn't need timing. I have seen the forums on how much needs to be removed but am concerned about getting the replacement properly installed. Any guidance would be appreciated.
Thanks
Tom
 
Old Dec 24, 2017 | 12:50 PM
  #2  
73shark's Avatar
Super Moderator
Joined: Apr 2006
Posts: 4,213
From: KC, MO area
Default

Best advice I can give you would be to obtain a copy of the factory service manual.
 
Old Dec 24, 2017 | 02:07 PM
  #3  
Tom G's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2009
Posts: 19
From: Prospect, Ohio
Default

Thank you, I may have to do this.
 
Old Dec 24, 2017 | 02:39 PM
  #4  
73shark's Avatar
Super Moderator
Joined: Apr 2006
Posts: 4,213
From: KC, MO area
Default

Might try checking your local library as sometimes they have factory service manuals.
 
Old Feb 15, 2018 | 02:37 PM
  #5  
blueshark's Avatar
Super Moderator
Joined: Jul 2006
Posts: 2,328
From: Dickson, TN.
Old Feb 16, 2018 | 08:52 AM
  #6  
Tom G's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2009
Posts: 19
From: Prospect, Ohio
Default

Not to late I have not done it yet! Thank you
 
Old Apr 21, 2018 | 10:44 AM
  #7  
FranU's Avatar
Junior Member
Joined: Apr 2018
Posts: 2
Default

Hi, don’t be intimidated by Optispark I’ve changed out the Opti in my 95 Impala SS twice and it’s really not that hard of a job. I know on the Corvette space is a lot tighter to work with but with patience you can do it. Definitely not $2000 bucks worth of work. Yes the Optispark only goes in one way. FS manual is a great help for sure.
 
Old Apr 21, 2018 | 08:58 PM
  #8  
73shark's Avatar
Super Moderator
Joined: Apr 2006
Posts: 4,213
From: KC, MO area
Default

There's an aftermarket Optispark available that is supposed to be redesigned to cure some of the OEM ills.
 
Old Apr 22, 2018 | 02:41 PM
  #9  
Tom G's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2009
Posts: 19
From: Prospect, Ohio
Default

Originally Posted by FranU
Hi, don’t be intimidated by Optispark I’ve changed out the Opti in my 95 Impala SS twice and it’s really not that hard of a job. I know on the Corvette space is a lot tighter to work with but with patience you can do it. Definitely not $2000 bucks worth of work. Yes the Optispark only goes in one way. FS manual is a great help for sure.
Thank you, I am going to give it a try.
 
Old Apr 22, 2018 | 02:44 PM
  #10  
Tom G's Avatar
Thread Starter
|
Junior Member
Joined: Mar 2009
Posts: 19
From: Prospect, Ohio
Default

Originally Posted by 73shark
There's an aftermarket Optispark available that is supposed to be redesigned to cure some of the OEM ills.
There seems to be a large range of prices on Optispark. Do you know the manufacture of the after market you have mentioned?
Thank you
 

Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:43 AM.