RE: tranny filter swap...
 

No offenseintended there my friend. Just playin' around. I appologize. [sm=hiya.gif]

RE: tranny filter swap...
 

It was a joke George. I was mimicin' someone else whosaid hefelt 'offended'.

Didn't bother me in the least.






mutterin':" I'll fix that bluefish character"[sm=icon_sneaky.gif]

RE: tranny filter swap...
 

Here's what we're lookin' at with the passenger side pan bolt.

[IMG]local://upfiles/5243/821D7074601844B08553B9FED07C51A3.jpg[/IMG]

[IMG]local://upfiles/5243/6DCF487DCDA64D4EB8501A8DCD5CFF9A.jpg[/IMG]

I used the closed end 13 mm. It ain't a picnic, cause of a flange on the pan, the heat shield for the exhaust, the clamp, 3 turtledoves and a partridge in a pear tree.

It slipped once[sm=yikesomg.gif]. You don't want to round off the head. And be careful with a laptop underneath the car.

Now on to the shift linkage...........

RE: tranny filter swap...
 

Your really not that funny.

RE: tranny filter swap...
 

The shift linkage/pan bolt didn't pull any punches.

The last 2 bolts are loose - one in the middle of the pan front, one in the middle of the pan rear. I put one paw up to the middle of the pan and pushed upward to the case, and held it tightly, so when I undid the last 2 bolts with my 5 thumbs on the other paw, the pan wouldn't surprise me with any tranny juice.

Notice that clamp on the right of the frame.

Nice placement, Bowling Green. Did you use a laser-guided smart clamp for that?

[IMG]local://upfiles/5243/298BB647CC2F478F8B22BB234B07440F.jpg[/IMG]

[IMG]local://upfiles/5243/0DFB1117A1374104BE560D04A4D3C813.jpg[/IMG]

RE: tranny filter swap...
 

edited...

RE: tranny filter swap...
 

You know, you had a good, informative thread going here. I never "hacked" on you about any keyboarding or technical mistakes you made concerning your posting abilities. That being said, your starting to look like an ass.

RE: tranny filter swap...
 

Niiiiiiiiice!

Nice straight drop. Just a little tilt, no torrents, easy does it... little tip, little more, llllllliiiiiiiiiiiiiiiiiiiittttttttttttttttttttttt ttttle bit mooooooooooooooooore. Okay, little pour. Little more tip, .........

[:@]C'mon down....... little more tip, little more flow...........

OK, turn the pan upside down, pour out the tranny fluid - there we go:D

Nice placement, Bowling Green. Did you use a laser-guided smart clamp for that? (Or did I ask that already?:eek:)

RE: tranny filter swap...
 

AHA! Did you figure that out all by yer self? You had help, didn'tcha'?

Just kiddin':D:D:D

RE: tranny filter swap...
 

Tell ya' what - ATF in yer coffee ain't bad. Makes ya' fast. In more ways than one:DAnd the grit makes for good tartar control:D:D

EDIT: Yup, not bad at all. Where's the rest of that stuff...? Ah - there's the pan...

Dang. Drat. All gone.

[IMG]local://upfiles/5243/CF3241D34E8D47AD8C693178075290AB.jpg[/IMG]

Hmmm. Wonder where it went?

[IMG]local://upfiles/5243/1B672A764B23439099404BA85345F614.jpg[/IMG]