VATS 87 cant find it
#1
VATS 87 cant find it
I droped the dash bottom and did not see the conector for the VATS
I purchased the bypass - were canI get a picture of what to look for
most of the wires are close to the floor board - old guy not much room
I purchased the bypass - were canI get a picture of what to look for
most of the wires are close to the floor board - old guy not much room
#4
RE: VATS 87 cant find it
That dang shiver character beat me to the punch again [:@][sm=chairshot.gif][:@][sm=headbang.gif][sm=icon_beat.gif][sm=icon_quiet.gif][sm=smiley35.gif]
Welcome to the boards there bill...
and since i missed snow on comin' in, wel... wel..., wel.....................................[:@]
welcome
MAN!- that felt like I was passin' stuff gettin' that out
[IMG]local://upfiles/5243/B1E3FDE75E3545668CB46ACC54184332.gif[/IMG]
Welcome to the boards there bill...
and since i missed snow on comin' in, wel... wel..., wel.....................................[:@]
welcome
MAN!- that felt like I was passin' stuff gettin' that out
[IMG]local://upfiles/5243/B1E3FDE75E3545668CB46ACC54184332.gif[/IMG]
#5
RE: VATS 87 cant find it
the pic he showed you is for the decoder mod. if you got the key code bypass,that plugs into the orange and black wire at the base of your steering cloumn. just follow those two wires down till you see the plug. it should plug right in.if your decoder is bad, good luck in finding one.mine is an 86.i had to order the chip for my ECM to bypass VATS alltogether.PCM for less was 200.00 but i am on the road now with no VATS headaches. they will also upgrade the performance for same price. i just had the standard upgrade and mine runs beautifully.
Thread
Thread Starter
Forum
Replies
Last Post