American Racing Torq Thrust II Rims
Thread Starter
|
Junior Member
Joined: May 2014
Posts: 1
American Racing Torq Thrust II Rims
I have 1979 Corvette front disc brake spindles and rotors on my 1955 Chevy.
I would like to put 15x7 American Racing Torq Thrust II rims on:
Q)BK3d6BnuhQ~~_35.JPG)
I know that the rim inside diameter will clear the caliper, but I'm concerned about the clearance between the rim and the caliper at the hub.
Has anyone put these rims on their 79 Vette? I was hoping to not have to use any spacers between the rim and the hub.
Thanks,
D55
I would like to put 15x7 American Racing Torq Thrust II rims on:
I know that the rim inside diameter will clear the caliper, but I'm concerned about the clearance between the rim and the caliper at the hub.
Has anyone put these rims on their 79 Vette? I was hoping to not have to use any spacers between the rim and the hub.
Thanks,
D55
Super Moderator
Joined: Apr 2006
Posts: 4,212
From: KC, MO area
Welcome to the forum.
The stock wheels have about a 4" negative offset. If your wheels are close to that, then they'll probably clear. Also might check with the vendor as they sometimes can tell you. Good luck.
The stock wheels have about a 4" negative offset. If your wheels are close to that, then they'll probably clear. Also might check with the vendor as they sometimes can tell you. Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
LMPerformance
Vendor Group And Special Buys
0
May 14, 2014 03:39 PM
Germaniac2
Parts/Other Sales
0
May 14, 2013 05:08 PM
Germaniac2
Corvette C5 Forum
0
Jun 20, 2011 09:29 PM
