which GM manual?
Thread Starter
|
Senior Member
Joined: May 2007
Posts: 1,567
From: eastern NC
which GM manual?
ORIGINAL: Notorious
Keep an eye on eBay and on any forums dedicated to Corvettes. Generally the two book set can be had for $50-75 used. They're still available new too for a hundred plus. They're a necessity IMO for anyone who plans to do much work on their car themselves. They can easily pay for themselves in one repair. Make sure they're the red cover manuals published by Helms. These are the full and authorized factory GM manuals.
Keep an eye on eBay and on any forums dedicated to Corvettes. Generally the two book set can be had for $50-75 used. They're still available new too for a hundred plus. They're a necessity IMO for anyone who plans to do much work on their car themselves. They can easily pay for themselves in one repair. Make sure they're the red cover manuals published by Helms. These are the full and authorized factory GM manuals.
Anybody seen both of 'em to compare which one is better?
Thread Starter
|
Senior Member
Joined: May 2007
Posts: 1,567
From: eastern NC
RE: which GM manual?
ORIGINAL: Superdzzz
Like I told everyone a coupla weeks ago, I got the FSM and Parts Catalogue on CD from a guy on Ebay
$10
Seems ok so far[sm=icon_cheers.gif]
Like I told everyone a coupla weeks ago, I got the FSM and Parts Catalogue on CD from a guy on Ebay
$10
Seems ok so far[sm=icon_cheers.gif]
Are you on Windows OS SDZ? Copy your stuff to your local [C:\] drive, and sell me the CD. How much material is actually on the disc? (Not total disc size, but how much material on disc???) Start/my computer/rt click CD Rom drive/properties... (with disc in the drive, of course
).
Joined: May 2006
Posts: 343
From:
RE: which GM manual?
I am running XP Pro. Absolutely NO compatibility issues. I have "helped" out others with a copy.
pm me so I don't **** anyone off for a copy
FSM and Parts Catalogue are both in PDF. Adobe is included. Don't recall if it is the most recent.
Easy enough to download and install
Anyways, the FSM is about 900 pages. Parts is about 3,000 pages.
File info: FSM is 19.5 MB Parts is 189 MB Adobe is 536K
I just burn 'em and mail 'em[8D]
Like I said, pm me for more info[sm=icon_cheers.gif]
pm me so I don't **** anyone off for a copy
FSM and Parts Catalogue are both in PDF. Adobe is included. Don't recall if it is the most recent.
Easy enough to download and install
Anyways, the FSM is about 900 pages. Parts is about 3,000 pages.
File info: FSM is 19.5 MB Parts is 189 MB Adobe is 536K
I just burn 'em and mail 'em[8D]
Like I said, pm me for more info[sm=icon_cheers.gif]
Thread
Thread Starter
Forum
Replies
Last Post
