Valve Cover Gaskets; R & R
Thread Starter
|
Member
Joined: Oct 2006
Posts: 59
Valve Cover Gaskets; R & R
1990/L98/350: I posted this in the C-4 section but no response. Can one of you teckiestell me the "Chilton Labor Time" or an "estimated" time to remove and replace the valve cover gaskets on my stock, 90/L98? I'm an average "shade tree" mech. with all the tools. Thanks, j
Super Moderator
Joined: Jul 2006
Posts: 5,244
From: Reno, Nv.
RE: Valve Cover Gaskets; R & R
I wouldn't think it would take over an hour to do both sides. Hood open, to hood closed. ( depends on clean up and prep required)
You may have to move some stuff, but it's not really complicated. Just don't get in a hurry.
You may have to move some stuff, but it's not really complicated. Just don't get in a hurry.
Thread Starter
|
Member
Joined: Oct 2006
Posts: 59
RE: Valve Cover Gaskets; R & R
Thanks Starship. I have a c-3and know its a pretty simple task there.Opening the hood on the c-4 is intimidating to me. There's stuff everwhere, especially on the left side. You have given me more confidence, but we will see. Thanks again
One step at a time, then move on. I'm sure that you'll do just fine. 
Thread
Thread Starter
Forum
Replies
Last Post
