To build or not to build
Hi all, Two questions.
1.- If you could build a late model car, 1990 up, what would it be? and what would you do? Money being a consideration as most people are on a budget.
2.- did '95-'96 Monte Carlos come with standard trans and were they front or rear wheel drive?
Three question I guess, LOL.
My car would obviously be a '95-'96 Monte Carlo. I was thinkin' of building one of the 4 bolt small blocks I have as a 383 stroker with long tube headers and straight back pipes withlake pipe cutouts,a 5 or 6 speed in it. tub out front and back enough to accomidate 275 45 17's, black cragers, teardrop hood, nascar rear foil, limmo tint, jet black paint with gold pearl and a ton of clear coat. I almost forgot...and lower it about an inch or so.
Of course I'll have to wait till I have enough "dust" to doit after finishing the many I already have. Unless my wife gets her way.....Not!
Cheers
1.- If you could build a late model car, 1990 up, what would it be? and what would you do? Money being a consideration as most people are on a budget.
2.- did '95-'96 Monte Carlos come with standard trans and were they front or rear wheel drive?
Three question I guess, LOL.
My car would obviously be a '95-'96 Monte Carlo. I was thinkin' of building one of the 4 bolt small blocks I have as a 383 stroker with long tube headers and straight back pipes withlake pipe cutouts,a 5 or 6 speed in it. tub out front and back enough to accomidate 275 45 17's, black cragers, teardrop hood, nascar rear foil, limmo tint, jet black paint with gold pearl and a ton of clear coat. I almost forgot...and lower it about an inch or so.
Of course I'll have to wait till I have enough "dust" to doit after finishing the many I already have. Unless my wife gets her way.....Not!
Cheers
That would be cool and you could chop the top too with old timey velosity stacks on top and zoomies comeing out the fenders.
Nothing wrong with MOPAR's
Nothing wrong with MOPAR's
Thread
Thread Starter
Forum
Replies
Last Post
deansreef
Corvette C4 Forum
4
Mar 23, 2007 11:56 PM





