injector and service light issue
#11
RE: injector and service light issue
If your signal wire is 7v from a 5v reference, you either read your meter wrong or you have a voltage feedback from the ECM. If you read your meter right, then either the ECM is bad or there is a short to B+ (Battery) on the signal wire to the ECM. Do you have a good voltage sweep by moving throttle and watching signal voltage? My bet is you have a bad ECM if your voltage readings are right with engine idleing. [8D]
Thread
Thread Starter
Forum
Replies
Last Post
shooter71
Corvette C4 Forum
1
06-16-2013 08:43 AM
splmagic1
Corvette C6 Forum
7
12-24-2006 09:01 PM