1(b) Egr & EGR Block-OFF KIT.. a must item if you are removing Emission. $ 25.00 US shipping included
http://members.shaw.ca/vettek/REDVETTE%20048.jpg or/and http://members.shaw.ca/vettek/REDVETTE%20047.jpg

2) hydraulic roller lifters comp cam part # 850-16 fitment - after 87 sbc with roller cam , used but in excellant condtion $160.00 US plus shipping http://members.shaw.ca/vettek/hydral...comp%20002.jpgOFFERS

3(a) Stock roller cam . used in excellant shape this part was used with above lifters .. $75.00 US, plus shipping (more info,part#& ) OFFERS

http://members.shaw.ca/vettek/FSstock.jpg

4) Stock modified valve covers. Machined to fit rollers rockers. sandblasted, Painted BASE/Clear COAT "corvette red" . both cover including bolts, inserts and oil cap: $100.00 US plus shipping
Note: tin covers on inside may have to be modified to fit larger rockers.
http://members.shaw.ca/vettek/stock%20cover%20002.jpg ..OFFERS

5) High torgue starter , good used with new solenoid contacts(partly rebuilt), . fits L98's 88-91 or great replacement for earlier models..$ 100.00 US... Plus shipping.. offers
http://members.shaw.ca/vettek/FS_starter.jpg

5) (2) rear hubs used but in good condition, approx, 45,000 miles(removed from my 89 becuz of total rear end upgrade to new components). these were put on lathe (tested)to determine run out and are still with in stock tolerance. $65.00 US each.. plus shipping http://members.shaw.ca/vettek/RED_vet_Hubs.JPG
offers

6).... NEW Air pump eliminator modified, single plate design..one only, new construction, C4, 86-90 L98, with Aluminum T-6 as machined pulley, does require new shorter (part #K060882)belt..$195.00US plus shipping

PICTURE here:http://members.shaw.ca/vettek/newmod.JPG
http://members.shaw.ca/vettek/prototypeAE%232%20005.jpg
http://members.shaw.ca/vettek/prototypeAE%232%20006.jpg
http://forums.corvetteforum.com/showthread.php?t=967381

please contact me for more info

 

ttt relied email