first vette question
#1
first vette question
Finally got my first corvette 93 lt1 40th anniversary coupe.
My question is the fuel always reads full. I manage an auto shop so I pulled the sending unit and checked function it seems ok (sweeps through ohm meter just fine). When installed in the car and started I get a full reading and 2.05 volts on the grey wire, with the car not started in the run position I get an open circut? any ideas what would cause this. I have a chilton manual on the car but thats useless.
My question is the fuel always reads full. I manage an auto shop so I pulled the sending unit and checked function it seems ok (sweeps through ohm meter just fine). When installed in the car and started I get a full reading and 2.05 volts on the grey wire, with the car not started in the run position I get an open circut? any ideas what would cause this. I have a chilton manual on the car but thats useless.
#5
RE: first vette question
Hello,my friend....mech259 seems to bo the go-to guy around here when it comes to things like this....he's very knowledgeable.But,if you want to go a step further,you may want to get a true service manual.Corvette Central has just what you may need;part # 114059,but here's the thing....it costs $129.95,so evidently the choice to get one is yours.Hope this help;always a friend,Joe. BTW,cwb is right,LOL!!!!!
Thread
Thread Starter
Forum
Replies
Last Post
splmagic1
Corvette C6 Forum
7
12-24-2006 09:01 PM