DIC message
Joined: Mar 2008
Posts: 71
From: Olney, MD
RE: DIC message
To reset the monitor after an oil change, turn the ignition on. Press the "TRIP" button so that the "OIL LIFE" percentage is displayed. Press "RESET" and hold it for two seconds. The word "RESET" should appear on the monitor, then "OIL LIFE 90%"
Joined: Mar 2008
Posts: 19
From:
RE: DIC message
to put aside any confusion don't start the car just in acc. mode or whatever. I wouldn't recommend pumping the gas 5 times to the floor with the car running, atleast if you baby your car 90% of the time like I do. lol 
peace
peace
Joined: Mar 2008
Posts: 71
From: Olney, MD
RE: DIC message
ORIGINAL: JetBlackC5
to put aside any confusion don't start the car just in acc. mode or whatever. I wouldn't recommend pumping the gas 5 times to the floor with the car running, atleast if you baby your car 90% of the time like I do. lolpeace
to put aside any confusion don't start the car just in acc. mode or whatever. I wouldn't recommend pumping the gas 5 times to the floor with the car running, atleast if you baby your car 90% of the time like I do. lol
peace
Thread
Thread Starter
Forum
Replies
Last Post
Pecemkr
Corvette C5 Forum
3
May 24, 2007 09:58 AM
